DSpace Repository

Browsing Faculty of Engineering / Mühendislik Fakültesi by Title

Browsing Faculty of Engineering / Mühendislik Fakültesi by Title

Sort by: Order: Results:

  • Pamuk Yağı Biyodizelinin Motor Ses Seviyesine Olan Etkilerinin İncelenmesi 
    Calik, Ahmet (Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / Çukurova Üniversitesi, 2017)
    Dizel motorlar, sağladıkları yakıt ekonomisi ve yüksek termal verimleriyle günümüzde en çok tercih edilen motor tipidir. Ancak sıkıştırma ateşlemeli motorlarda yüksek sıkıştırma oranından dolayı meydana gelen ses dizel ...
  • Performance Analysis of Grid-Connected Micro-Cogeneration System Based on The Internal Combustion Engine 
    Yavuzdeger, Abdurrahman; Ekinci, Firat (European Mechanical Science / Ahmet Çalık, 2019)
    The effective usage of energy is an important factor in our country and world. The cogeneration system is one of the methods for the effective usage of energy. The cogeneration system in recent technology is about 30% more ...
  • Performance Analysis of Solar Powered Absorption Refrigeration System for Mersin Province 
    Sahin, Besir; Bilgili, Mehmet; Cetingoz, Altan; Kurtulmus, Nazim (Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / Çukurova Üniversitesi, 2016)
    In this study, performance analysis of solar-powered absorption refrigeration (SPAR) system is evaluated using hourly atmospheric air temperature and solar radiation data in Mersin city. Ammonia-water (NH3H2O) as ...
  • Performance and Economic Analysis of Designed Different Solar Tracking Systems for Mediterranean Climate 
    Demirdelen, Tugce; Alici, Hakan; Esenboga, Burak; Guldurek, Manolya (ENERGIES / MDPI, 2023-05)
    Solar power occupies a significant position among global renewable energy sources due to its abundant energy potential. Consequently, its contribution to electricity generation is steadily increasing. However, obtaining ...
  • PERFORMANCE ASSESSMENT OF A COGENERATION SYSTEM IN FOOD INDUSTRY 
    Ozdil, Naime Filiz; Tantekin, Atakan; Pekdur, Arzu (JOURNAL OF THERMAL ENGINEERING / YILDIZ TECHNICAL UNIV, 2018-02)
    Extensive analysis of the thermodynamics first and second laws is performed on a 14.25 MW cogeneration plant in Adana, Turkey. In this study, the most important parts of the system is observed and thermodynamic performance ...
  • Performance Benchmarking of Active-Front-End Rectifier Topologies Used in High-Power, High-Voltage Onboard EV Chargers 
    Cuma, Mehmet Ugras; Savrun, Murat Mustafa (Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi = Cukurova University Journal of the Faculty of Engineering / Çukurova Üniversitesi, 2021-12)
    High power onboard battery chargers employed in electric vehicles (EVs) and plug-in hybrid EVs (PHEVs) fed from three-phase mains typically consist of a two-stage structure as AC-DC and DC-DC stages. The AC-DC stage is ...
  • Physical Properties and Microstructure of Concrete with Waste Basalt Powder Addition 
    Dobiszewska, Magdalena; Beycioglu, Ahmet (MATERIALS / MDPI, 2020-08)
    The natural aggregates are one of the main components in the production of concrete. Although deposits of natural aggregates lie on the earth's surface or at low depths and belong to common deposits, the shortage of ...
  • Physical restrictions of the flotation of fine particles and ways to overcome them 
    Stoyan, I. Karakashev; Grozev, Nikolay A.; Ozdemir, Orhan; Guven, Onur; Ata, Seher; Bournival, Ghislain; Batjargal, Khandjamts; Boylu, Feridun; Hristova, Svetlana; Celik, Mehmet Sabri (PHYSICOCHEMICAL PROBLEMS OF MINERAL PROCESSING / OFICYNA WYDAWNICZA POLITECHNIKI WROCLAWSKIEJ, 2022-09)
    This work analyses the basic problems of the fine particles flotation and suggests new ways to overcome them. It is well accepted that the poor recovery of fine particles is due to the small collision rate between them and ...
  • Physicochemical Characterization and Antioxidant Properties of Chitosan and Sodium Alginate Based Films Incorporated with Ficus Extract 
    Bhatia, Saurabh; Al-Harrasi, Ahmed; Shah, Yasir Abbas; Jawad, Muhammad; Al-Azri, Mohammed Said; Ullah, Sana; Anwer, Md Khalid; Aldawsari, Mohammed F.; Koca, Esra; Aydemir, Levent Yurdaer (POLYMERS / MDPI, 2023-03)
    Aqueous extract of fruit obtained from Ficus racemosa enriched with phenolic components was used for the first time to fabricate chitosan (CS) and sodium alginate (SA)-based edible films. The edible films supplemented with ...
  • Physicochemical Characterization of Natural Wollastonite and Calcite 
    Kangal, Murat Olgac; Bulut, Gulay; Guven, Onur (MINERALS / MDPI, 2020-03)
    Wollastonite and calcite minerals are significant raw materials and are extensively used due to their unique properties. Wollastonite is used in plastics, paint, ceramics, paper, resins, and in construction as a substitution ...
  • Polar Codes with Higher-Order Memory 
    Afser, Huseyin; Delic, Hakan (PROBLEMS OF INFORMATION TRANSMISSION / MAIK NAUKA/INTERPERIODICA/SPRINGER, 2018-10)
    We introduce a construction of a set of code sequences {C-n((m)) : n 1, m 1} with memory order m and code length N(n). {C-n((m))} is a generalization of polar codes presented by Arkan in [1], where the encoder mapping with ...
  • POLİFOSFORİK ASİT (PPA) MODİFİYE BİTÜMÜN FİZİKSEL VE REOLOJİK ÖZELLİKLERİNİN ARAŞTIRILMASI 
    Gokalp, Islam (Mühendislik Bilimleri ve Tasarım Dergisi = Journal of Engineering Sciences and Design / Süleyman Demirel Üniversitesi, 2021-09)
    Gelişen otomotiv endüstrisine, artan nüfusa ve nüfusun araç talebine bağlı olarak trafiğe çıkan araç sayıların da belirgin bir yükseliş söz konusudur. Geleneksel bitümler ile inşa edilen yol kaplamaları, ağır taşıt trafiği ...
  • POLİMER MODİFİYE BİTÜM MODİFİKASYONUNA ETKİ EDEN PARAMETRELER ÜZERİNE BİR LİTERATÜR ARAŞTIRMASI 
    Gokalp, Islam; Cetin, Hatice Merve; Ozinal, Yagmur; Gundogan, Huseyin; Uz, Volkan Emre (Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi / Ömer Halisdemir Üniversitesi, 2019-07)
    Ülkemizde yol üstyapıları, dünyanın diğer birçok ülkesinde olduğu gibi çoğunlukla bitümlü karışımlar şeklinde inşa edilmektedir. Bitümlü bağlayıcıların karışım içerisindeki oranı (ağırlıkça %5-7) düşüktür ama özellikleri ...
  • Porosity and thickness effect of Pd-Cu-Si metallic glasses on electrocatalytic hydrogen production and storage 
    Sarac, Baran; Karazehir, Tolga; Yuce, Eray; Muehlbacher, Marlene; Sarac, A.Sezai; Eckert, Jurgen (MATERIALS & DESIGN ELSEVIER LTDS:, 2021-11)
    This contribution places emphasis on tuning pore architecture and film thickness of mesoporous Pd-Cu- Si thin films sputtered on Si/SiO2 substrates for enhanced electrocatalytic and hydrogen sorption/desorp-tion activity ...
  • Predicted fuel characteristics of prunus avium seed oil as a candidate for biodiesel production 
    Abdulvahitoglu, Asli (International Journal of Automotive Engineering and Technologies IJAET / Murat CİNİVİZ, 2019-12)
    Energy is an indispensable requirement for both developed and developing societies today. However, most of the energy needs are met by fossil fuels, these resources are not renewable. Many countries are evaluating alternative ...
  • Prediction of bearing capacity of circular footings on soft clay stabilized with granular soil 
    Ornek, Murat; Laman, Mustafa; Demir, Ahmet; Yildiz, Abdulazim (SOILS AND FOUNDATIONS / Japanese Geotechnical Society, 2012-02)
    The shortage of available and suitable construction sites in city centres has led to the increased use of problematic areas, where the bearing capacity of the underlying deposits is very low. The reinforcement of these ...
  • Prediction of fatty acid composition of sunflower seeds by near-infrared reflectance spectroscopy 
    Akkaya, Murat Reis (JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE / SPRINGER INDIA, 2018-06)
    This study was performed in order to evaluate efficiency of near-infrared reflectance spectroscopy (NIRS) for the determination of fatty acid composition ratio of sunflower seeds and to compare performance of calibration ...
  • Prediction of Ultimate Tensile Strength of Prestressed Concrete Strand Using Artificial Neural Network Model 
    Cuma, Mehmet Ugras; Ozel, Hayrullah; Koroglu, Tahsin (Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / Çukurova Üniversitesi, 2018)
    The iron and steel industry is one of the essential sector for the industrial and economic development of a country. The most common problem in iron and steel industry is to determine the ultimate tensile strength of the ...
  • Prefabrik Düşey Drenlerin Farklı Eşleme Yöntemleri ile Sayısal Analizi 
    Tunc, Ufuk; Colakoglu, Huseyin; Ustunay, Erdem; Yildiz, Abdulazim; Bagriacik, Baki (Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi = Cukurova University Journal of the Faculty of Engineering / Çukurova Üniversitesi, 2021-12)
    Yumuşak zeminler üzerine inşa edilen dolgularda zamana bağlı konsolidasyon oturmalarının dikkatli bir şekilde incelenmesi gereklidir. Bu tür zeminlerde konsolidasyon oturmalarını hızlandırmak için kil zemin içerisine ...
  • Preparation and Characterization of Calcite Loaded Poly (Lactic Acid) Composite Materials 
    Dike, Ali Sinan (Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi = Erzincan University Journal of Science and Technology / Erzincan Üniversitesi, 2020-03)
    In this work, calcite (KS) mineral was compounded with poly (lactic acid) (PLA) at the concentrations of 5, 10, 15 and 20 wt% using extrusion process. Test samples of PLA and composites were prepared by injection molding. ...

Search DSpace


Advanced Search

Browse

My Account